|
|
PRODUCTS > Strip Timber
Strip timber flooring is a good alternative to obtain a solid timber floor which can be installed in a variety of situations.
Solid timber strip flooring is the ideal selection to produce a beautiful and long lasting floor. Correct installation is imperative to realizing the floor’s potential.
As timber is a natural product, and responds to its surrounding environment, it is important to ensure the product is acclimatized prior to installation.
It is a hygroscopic material – that is, it changes its own moisture content to be in equilibrium with the atmosphere (EMC– Equilibrium Moisture Content).
As this moisture is taken up or expelled, the physical dimensions of the material also changes.
Most timber flooring products are kiln dried to a level of moisture content within a range of 8-14% as specified in the Australian Standard 2796.
Timber will either take up or shed moisture to be in equilibrium with the prevailing conditions.
Moisture content (MC) refers to the percentage weight of water present in the timber compared to the weight of the timber with all the water removed (dry weight).
|
 |
|
|
Where timber is installed in conditions where the prevailing conditions are moist, either through the local climatic conditions or specific site conditions, the timber absorbs moisture and increases the dimensions of the board. Conversely, where prevailing conditions are drier than that of the timber in its delivered state, the timber will shrink.
Gluing
The glues used to adhere timber flooring must be specialist elastomeric glues. Glues that set hard, such as contact or general building adhesives, are not suitable and can lift off the substrate.
Nailing
Building regulations govern the size and number of nails used to fix strip flooring to joists. Boards over 85 mm wide MUST be surface nailed. Only boards 85mm wide or less can be secret nailed. Overlay and panel floors should be nailed in accordance with the manufacturer’s instructions. We note that strip timber floors are different to floating floors as floating floors are not fixed to the substrate but are held down by skirting boards.
Types Of Installation
Styles
We have an exceptionally large range of local and imported timbers from which to select.
Direct Stick
Timber is nailed or stuck directly to an existing sub-floor.
On Battens
Battens are secured to the sub-floor and the timber is either secret nailed or top nailed.
On Underlay
Timber is installed on a masonite flooring underlay that has been secured to a suitable sub-floor.
Sanding
After our floors are professionally installed they are sanded and three heavy coats of polyurethane are applied.
|